Culligan RO module (TFC) Water System

[dig555]

I have a culligan RO module (TFC)water system. Looking for the filter replacement #01000145. Can you help?

[waterfilters]

Here is the RO Membrane you need:
Culligan Compatible TFM36A and GE Desal Osmonics Membrane TFM-36-A for Reverse Osmosis Systems
I'm not sure which Culligan system you have since there are several that use this RO Membrane. The most popular Culligan RO system is this one in case you need some of the other replacement filters:
Culligan AC30 and Culligan Aqua Clear AC-30 Reverse Osmosis System Replacement Filters
If you know your system's model number, I can point you to your system.

Thank you,
WaterFilters.NET

[dig555]

The only thing I could find on the system was AUQA-CLEER WATER SYSTEM. This was on the holding tank. the system has two filters with RO module (TFC) use module #01000145. Does that help you? Thanks.

[waterfilters]

Yes, that helps.

You will need the PRE-RO filter for the first stage and the TFM-36-A for the 2nd stage. Both of these filters are located here:
Culligan H30S-R and Culligan H30SR Reverse Osmosis System Replacement Filters for the H-30S-R
The PRE-RO filter will need to be change most often. It should be changed every 3-6 months depending on your usage and water quality. The RO membrane should last about 2 years but also depends on your water quality and water usage.

Some systems have a small 6" post-filter that is also listed on the above page as Stage 3. Not all systems have this filter but if you have it, it will be after these two filters and is connected to the tubing. You will need to check your tubing to see if it is 1/4" or 3/8" to determine which post-filter you need. If you do have the post filter, it should be changed about once a year.

Thank you,
WaterFilters.NET