Water Filters made Easy At![]() |
| |||||||
| Reducing and Removing Water Contaminants A few very common questions about removing contaminants from drinking water |
![]() |
| | LinkBack | Thread Tools | Display Modes |
| |||
| My water was tested just recently, here are the results: Hardness = 120+ pH = 8 Nitrate/Nitrite = 2.0 & 0 Iron = 0.02 Free Chlorine = 0.0 Manganese = 0.02 Total Chlorine = 0.02 Hydrogen Sulfide = 0.0 Water Metals = <10 Bacteria = (waiting 48 hrs.) We want softer water. Hardness color was between 120 - 180 (not exact match for either but in between). The pH is slightly acidic. This is city water. What do you suggest -- can it be done with media tank or do we need a brine tank? |
| |||
| It sounds like you have approximately 9 grains of hardness per gallon in your water. The water is a little basic, but it isn't too bad. If we assume the house is built for 4 -5 people, you should have approximately 400-500 gallons per day of usage. This is 3600-4500 grains per day. Since you should regenerate every 3-4 days, you should size your system for 14,400-18,000 grains. A 1 cubic foot unit will take care of the problem. You have pricing on the various options based on features you want to provide. I think the base softener would be fine for you. The Nitrates are not at an unsafe level, however it would still be good to reduce them. They can be reduced by reverse osmosis for drinking water. Thank you, WaterFilters.NET |
![]() |
| Thread Tools | |
| Display Modes | |
| |