Ge Fxuvc

[tentoes]

I have a current system that uses a single GE FXUVC. I would like to install a second filter holder in a second location. Which Culligan unit will hold this filter?

[waterfilters]

Here are several options. Any of these will work with the FXUVC that you mentioned. The housing you select will depend on the inlet/outlet size you need and the type of housing you want.
http://www.waterfilters.net/culligan/undersink/housings/US-550.htm - 3/8" inlet/outlet

http://www.waterfilters.net/Culligan-HF-160-Wholehouse-Filter-Housing_p_0-2256.html - 3/4" inlet/outlet clear housing

http://www.waterfilters.net/Pentek-150164-VIH-Whole-House-Housing_p_0-1557.html - 3/4" inlet/outlet valve in head housing

http://www.waterfilters.net/Pentek-158643-3G-IB-Slim-Line-Filter-Housing_p_0-2205.html - 3/8" inlet/outlet integraged bracket clear housing.


Here are a couple filters that are very similar to the FXUVC filters. These filters will work in the above housings as well as the FXUVC.

This filter is the Pentek CBR2-10 and it is slightly wider than the FXUVC:
http://www.waterfilters.net/Pentek/wholehouse/Carbon_Filters/CBR2-10.htm

This filter is the Culligan D-40 and it is thinner than the FXUVC:
http://www.waterfilters.net/culligan/undersink/replacement_filters/D-40.htm

Here is the FXUVC:
http://www.waterfilters.net/GE-FXUVC-Under-Sink-Water-Filter_p_96-349.html

Thank you,
WaterFilters.NET